Lay out the parts
Check the cable path before tightening the base.
WORKSHOP MANUAL / 07
REV. 2026–08
PRINT ↓
ASSEMBLY NOTE A–14
Build a better work lamp.
An open plan for a repairable desk light made from six standard parts. Every joint can be reached with one hex key.
TIME 45 MINPARTS 06LEVEL EASY
Ø 240 MM
ARM 420 MM
ARM 420 MM
Seat the lower arm
Leave the joint loose enough to rotate.
Route the cable
Keep ten millimetres clear of both pivots.
Balance and test
Adjust tension only after the lamp is powered.